Chronickels

Nickel news, views, commentary and insights

SEPTEMBER 06 - 2022

300 series austenitic alloys – Checking all the boxes

Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.

STAINLESS STEEL NICKEL ALLOYS TOOL STEEL NICKEL STEEL TECHNICAL HELP
JUNE 10 - 2022

300 series vs. ferritic stainless steel – Which one should I choose?

Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.

NICKEL ALLOYS STAINLESS STEEL NICKEL STEEL
MAY 17 - 2022

300 series vs. duplex stainless steel – Which one should I choose?

The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.

NICKEL ALLOYS STAINLESS STEEL NICKEL STEEL
APRIL 06 - 2022

300 vs 200 series stainless steels - Which alternative suits?

The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.

NICKEL ALLOYS NICKEL STEEL STAINLESS STEEL
SEPTEMBER 23 - 2021

Wind and water - Nickel in clean energy

Even small quantities of nickel in an application can make a big difference to successful deployment.

NICKEL ALLOYS STAINLESS STEEL WATER SUSTAINABILITY SUSTAINABLE DEVELOPMENT GOALS BATTERIES RENEWABLE ENERGY
AUGUST 26 - 2021

Would you drink the water coming out of a municipal Wastewater Treatment Facility ?

“There’s a mental hurdle to get over of how inherently gross this could be, but we know that this water is safe, and we stand by our process.”

WATER
MARCH 24 - 2020

Onboard with marine scrubbers - resilient solutions for lower emissions

Ever-tightening sulphur oxide (SOx) emission regulations are increasing the use of marine scrubbers globally. Scrubbers operate in a highly corrosive environment and require the resilience of nickel-containing alloys to prevent failure.

NICKEL ALLOYS MARINE SCRUBBERS TECHNICAL HELP
JANUARY 31 - 2020

Strong, hard and tough: the many ways nickel-containing alloy steels deliver

Most nickel production is destined for stainless steel. But a significant 8% is used in the production of alloy steels which are needed to deliver specific characteristics for specialised and often critical applications.

NICKEL ALLOYS MARAGING STEEL TOOL STEEL NICKEL STEEL TECHNICAL HELP