Chronickels

Nickel news, views, commentary and insights

SEPTEMBER 06 - 2022

300 series austenitic alloys – Checking all the boxes

Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.

STAINLESS STEEL NICKEL ALLOYS TOOL STEEL NICKEL STEEL TECHNICAL HELP
JANUARY 27 - 2022

Mining electronics waste

Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.

SUSTAINABILITY BATTERIES RESOURCES AND RESERVES RECYCLING RESEARCH & DEVELOPMENT RAW MATERIALS
JANUARY 26 - 2021

A wealth of knowledge

A new generation of designers, materials specifiers, architects and engineers is being introduced to the wealth of technical information curated by the Nickel Institute. An archive of technical guides and know-how for working with nickel-containing materials, including stainless steel, that has been built over thirty years is now being updated and made freely available.

NICKEL ALLOYS NICKEL STEEL STAINLESS STEEL TECHNICAL HELP ARCHITECTURE, BUILDING AND CONSTRUCTION
APRIL 21 - 2020

Functional façades help tackle building emissions

Around two-thirds of today’s buildings will still be around in 2050, and by 2060, the world is projected to add 230 billion m² of buildings - an area equivalent to the entire current global building stock. What can the building and construction sector do to reduce the environmental burden of buildings?

CURTAIN WALLS SUSTAINABILITY ARCHITECTURE, BUILDING AND CONSTRUCTION
MARCH 24 - 2020

Onboard with marine scrubbers - resilient solutions for lower emissions

Ever-tightening sulphur oxide (SOx) emission regulations are increasing the use of marine scrubbers globally. Scrubbers operate in a highly corrosive environment and require the resilience of nickel-containing alloys to prevent failure.

NICKEL ALLOYS MARINE SCRUBBERS TECHNICAL HELP
FEBRUARY 29 - 2020

Why Europe’s battery value chain needs regulatory certainty – now

European nickel producers need a consistent regulatory framework. There must be coherence between different EU policy objectives with rules based on principles of sound science, risk-based approaches, full life-cycle thinking and impact assessments.

BATTERIES EU POLICY RAW MATERIALS SUSTAINABILITY
FEBRUARY 19 - 2020

Opportunity knocks for nickel

Nickel’s role in enabling technologies is not always common knowledge. Yet its versatile properties present great opportunity for the nickel industry.

TECHNICAL HELP MARINE SCRUBBERS WATER DISTRIBUTION
JANUARY 31 - 2020

Strong, hard and tough: the many ways nickel-containing alloy steels deliver

Most nickel production is destined for stainless steel. But a significant 8% is used in the production of alloy steels which are needed to deliver specific characteristics for specialised and often critical applications.

NICKEL ALLOYS MARAGING STEEL TOOL STEEL NICKEL STEEL TECHNICAL HELP
JANUARY 06 - 2020

Is there enough nickel? Reserves, resources and recycling

Should we be worried about there being enough nickel to supply the transition to electric vehicles and cleaner energy sources? Given its wide range of uses in important existing and emerging technologies, this is a frequently asked question.

SUSTAINABILITY RAW MATERIALS RESOURCES AND RESERVES SUPPLY CHAIN RECYCLING