In Part 2 of this series we dig deeper into the specifics of laterites, one of the two main nickel ore types and look at smelting, the most common processing technique.
Heather Allain, Executive Director, Materials Technology Institute (MTI), tells us about her passion for materials and the importance of MTI’s work to provide awareness of safe, reliable and sustainable materials use.
Dr. Veronique Steukers sets out three principles which will allow companies to manage and measure ESG impacts and engage on a path to improvement.
Let's dive into this new series of articles on sustainability, treatment processes and innovations in nickel production, starting with nickel ores.
As much of the world heads to the polls this year, Veronique Steukers explains why newly elected lawmakers should care about nickel and why they should consider three policy asks.
The ambitious future of India’s rail infrastructure requires prudent investments that ensure its long-term viability. This is where nickel-containing steels play a vital role.
Mark Mistry and Marco Vallini argue that for the EU Critical Raw Materials Act to fulfil its promise to address the energy transition, industry needs planning security for both ‘critical’ and ‘strategic’ raw materials.
Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.
Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.
The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.
The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.
The proposed Regulation will introduce a wide range of sustainability requirements and promote the recycling of key battery raw materials like nickel. EU legislative work is entering a crucial phase.
Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.
Major economies across the globe are setting climate neutrality targets. But proper measurement and methodologies are needed to provide transparency and common benchmarks when assessing carbon footprint. At a recent event in China, there was general consensus on the importance of adopting a harmonized approach to carbon footprint calculation and disclosure.
Nickel-based alloys and nickel-containing stainless are playing key roles in an emerging source of renewable energy known as thermal solar plants or concentrated solar power (CSP). Their use has enabled the industry to overcome challenges in heat transfer and thermal storage technology.
When Courtney Love wrote this she was not thinking about rockets. It is, however, a perfect description of the history of rocketry. Until the Elon Musk revolution.
Space is hard but nickel makes it possible. The United States of America, through the private company SpaceX, imminently expects to regain its independent way into space.
Around two-thirds of today’s buildings will still be around in 2050, and by 2060, the world is projected to add 230 billion m² of buildings - an area equivalent to the entire current global building stock. What can the building and construction sector do to reduce the environmental burden of buildings?