Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.
The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.
Nickel-based alloys and nickel-containing stainless are playing key roles in an emerging source of renewable energy known as thermal solar plants or concentrated solar power (CSP). Their use has enabled the industry to overcome challenges in heat transfer and thermal storage technology.
Geothermal energy for electric power production has a low profile yet is significant in the current and potential energy mix for a number of countries. It has also been described as the most reliable of the renewable energy sources, above weather-dependent wind, solar and hydropower.
The many new and innovative applications of hydrogen as fuel show great promise for a greener future.
The last three months have been unprecedented. But amidst the chaos and despite the drop in global GDP, there has still been a considerable amount of activity in the electric vehicle (EV) and battery world.
Around two-thirds of today’s buildings will still be around in 2050, and by 2060, the world is projected to add 230 billion m² of buildings - an area equivalent to the entire current global building stock. What can the building and construction sector do to reduce the environmental burden of buildings?
Ever-tightening sulphur oxide (SOx) emission regulations are increasing the use of marine scrubbers globally. Scrubbers operate in a highly corrosive environment and require the resilience of nickel-containing alloys to prevent failure.
Nickel’s role in enabling technologies is not always common knowledge. Yet its versatile properties present great opportunity for the nickel industry.
Most nickel production is destined for stainless steel. But a significant 8% is used in the production of alloy steels which are needed to deliver specific characteristics for specialised and often critical applications.