After several years of negotiation between EU institutions, the EU Carbon Border Adjustment Mechanism (CBAM) Regulation was adopted in 2023.
Because the first step in reducing emissions is to measure them, the Nickel Institute has produced guidance to help nickel metal producers calculate their GHG emissions.
Reducing energy-related CO2 emissions is pivotal to limiting climate change, with the main drivers to bring about the required carbon reductions being renewable energy and energy efficiency. Concentrated solar power is one such renewable energy technology set to increase dramatically in the foreseeable future. It will need to provide energy at a competitive cost to outshine the competition.
Awareness about robustness and durability of bridge design has grown since Morandi’s time. The new San Giorgio Bridge (its successor) in Genoa was designed by Renzo Piano and inaugurated in 2020.
Geothermal energy for electric power production has a low profile yet is significant in the current and potential energy mix for a number of countries. It has also been described as the most reliable of the renewable energy sources, above weather-dependent wind, solar and hydropower.
Ever-tightening sulphur oxide (SOx) emission regulations are increasing the use of marine scrubbers globally. Scrubbers operate in a highly corrosive environment and require the resilience of nickel-containing alloys to prevent failure.
European nickel producers need a consistent regulatory framework. There must be coherence between different EU policy objectives with rules based on principles of sound science, risk-based approaches, full life-cycle thinking and impact assessments.
Most nickel production is destined for stainless steel. But a significant 8% is used in the production of alloy steels which are needed to deliver specific characteristics for specialised and often critical applications.
Should we be worried about there being enough nickel to supply the transition to electric vehicles and cleaner energy sources? Given its wide range of uses in important existing and emerging technologies, this is a frequently asked question.