In Part 2 of this series we dig deeper into the specifics of laterites, one of the two main nickel ore types and look at smelting, the most common processing technique.
Heather Allain, Executive Director, Materials Technology Institute (MTI), tells us about her passion for materials and the importance of MTI’s work to provide awareness of safe, reliable and sustainable materials use.
Let's dive into this new series of articles on sustainability, treatment processes and innovations in nickel production, starting with nickel ores.
China’s annual “two sessions” gives an indication of China’s broad policy direction for the year, covering topics from the economy to industrial strategy to environmental protection. David Chen explains the highlights, and the implications for the nickel value chain.
Mark Mistry and Marco Vallini argue that for the EU Critical Raw Materials Act to fulfil its promise to address the energy transition, industry needs planning security for both ‘critical’ and ‘strategic’ raw materials.
Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.
Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.
The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.
The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.
The proposed Regulation will introduce a wide range of sustainability requirements and promote the recycling of key battery raw materials like nickel. EU legislative work is entering a crucial phase.
Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.
More than ten years on from the implementation of the EU’s REACH regulation, NiPERA’s Tara Lyons-Darden looks back and shares some of the learnings and the challenges of maintaining REACH dossiers from the perspective of the Nickel REACH Consortia.
As delegates to the UN COP26 Climate Change conference in Glasgow grapple with the climate crisis, clean energy solutions will be in focus. Although clean energy technologies rely on metals and minerals that are unavoidably energy intensive to produce, the IEA says that the climate advantages of these technologies remain clear.
Even small quantities of nickel in an application can make a big difference to successful deployment.
Nickel-based alloys and nickel-containing stainless are playing key roles in an emerging source of renewable energy known as thermal solar plants or concentrated solar power (CSP). Their use has enabled the industry to overcome challenges in heat transfer and thermal storage technology.
Geothermal energy for electric power production has a low profile yet is significant in the current and potential energy mix for a number of countries. It has also been described as the most reliable of the renewable energy sources, above weather-dependent wind, solar and hydropower.
The many new and innovative applications of hydrogen as fuel show great promise for a greener future.
As electric vehicles (EVs) trend from being niche to mass scale and the lines between EVs and their combustion engine (ICE) counterparts get blurred in terms of usability, consumers, automakers, governments and fire departments continue to have some apprehensions.
A new generation of designers, materials specifiers, architects and engineers is being introduced to the wealth of technical information curated by the Nickel Institute. An archive of technical guides and know-how for working with nickel-containing materials, including stainless steel, that has been built over thirty years is now being updated and made freely available.
The last three months have been unprecedented. But amidst the chaos and despite the drop in global GDP, there has still been a considerable amount of activity in the electric vehicle (EV) and battery world.
New energy legislation is set to optimize China’s energy structure and boost the use of non-fossil energy. Aligning with China’s regulatory agenda, nickel will play a vital role in tomorrow’s world powered by cleaner energy.
Space is hard but nickel makes it possible. The United States of America, through the private company SpaceX, imminently expects to regain its independent way into space.
The electric vehicle market is expected to be by far the largest and most dominant market for lithium-ion (Li-ion) batteries. Despite the strong desire to increase EV sales by all involved in the value chain, proliferation has been curbed due to the high cost to the consumer and the perceived disadvantages of owning an EV. Range anxiety, a lack of charging stations and fire safety worries, are among the top concerns.