Heather Allain, Executive Director, Materials Technology Institute (MTI), tells us about her passion for materials and the importance of MTI’s work to provide awareness of safe, reliable and sustainable materials use.
After several years of negotiation between EU institutions, the EU Carbon Border Adjustment Mechanism (CBAM) Regulation was adopted in 2023.
The new EU Battery regulation has implications for nickel producers both inside and outside Europe. If they are supplying material to the EU battery chain destined for the European market all producers need to comply with the new rules.
Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.
The sudden failure of a building or bridge is mercifully a rare event, thanks largely to international or national standards: structures are designed in accordance with a design standard, using products conforming to a product standard and manufactured using techniques and to a quality level defined in a construction standard.
Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.
The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.
The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.
Batteries, notably those used in electric vehicles, play an essential role in the plans of the European Commission to deliver the EU Green Deal. They are considered as a critical and strategic technology to achieve Europe´s ambitious climate change mitigation targets and to move towards green and sustainable mobility.
Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.
Major economies across the globe are setting climate neutrality targets. But proper measurement and methodologies are needed to provide transparency and common benchmarks when assessing carbon footprint. At a recent event in China, there was general consensus on the importance of adopting a harmonized approach to carbon footprint calculation and disclosure.
Even small quantities of nickel in an application can make a big difference to successful deployment.
Nickel-based alloys and nickel-containing stainless are playing key roles in an emerging source of renewable energy known as thermal solar plants or concentrated solar power (CSP). Their use has enabled the industry to overcome challenges in heat transfer and thermal storage technology.
“There’s a mental hurdle to get over of how inherently gross this could be, but we know that this water is safe, and we stand by our process.”
Geothermal energy for electric power production has a low profile yet is significant in the current and potential energy mix for a number of countries. It has also been described as the most reliable of the renewable energy sources, above weather-dependent wind, solar and hydropower.
A new generation of designers, materials specifiers, architects and engineers is being introduced to the wealth of technical information curated by the Nickel Institute. An archive of technical guides and know-how for working with nickel-containing materials, including stainless steel, that has been built over thirty years is now being updated and made freely available.
Space is hard but nickel makes it possible. The United States of America, through the private company SpaceX, imminently expects to regain its independent way into space.
Food safety starts with rigorous hygiene, and nickel-containing stainless steels are the superior, reliable standard at every link of the food chain.
Should we be worried about there being enough nickel to supply the transition to electric vehicles and cleaner energy sources? Given its wide range of uses in important existing and emerging technologies, this is a frequently asked question.