Heather Allain, Executive Director, Materials Technology Institute (MTI), tells us about her passion for materials and the importance of MTI’s work to provide awareness of safe, reliable and sustainable materials use.
After several years of negotiation between EU institutions, the EU Carbon Border Adjustment Mechanism (CBAM) Regulation was adopted in 2023.
The new EU Battery regulation has implications for nickel producers both inside and outside Europe. If they are supplying material to the EU battery chain destined for the European market all producers need to comply with the new rules.
Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.
What is a “sustainable product”? Is it more sustainable to continue using my old washing machine or to buy a new, more energy efficient one? Are single use products always unsustainable? What criteria should I use to judge whether a product is sustainable or not? What measures can we take to promote sustainability in products?
Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.
The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.
The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.
Batteries, notably those used in electric vehicles, play an essential role in the plans of the European Commission to deliver the EU Green Deal. They are considered as a critical and strategic technology to achieve Europe´s ambitious climate change mitigation targets and to move towards green and sustainable mobility.
Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.
Even small quantities of nickel in an application can make a big difference to successful deployment.
The present-day principal driver in the Li-ion industry is the large batteries required for electric vehicles. Due to the size of these batteries and the relative growth of electric vehicles it is predicted that the total Li-ion energy capacity will exceed one tera watt-hour by 2030. This anticipation for a dramatically rapidly expanding industry has stakeholders all along the value chain very motivated to be ready.
Should we be worried about there being enough nickel to supply the transition to electric vehicles and cleaner energy sources? Given its wide range of uses in important existing and emerging technologies, this is a frequently asked question.