In Part 2 of this series we dig deeper into the specifics of laterites, one of the two main nickel ore types and look at smelting, the most common processing technique.
Heather Allain, Executive Director, Materials Technology Institute (MTI), tells us about her passion for materials and the importance of MTI’s work to provide awareness of safe, reliable and sustainable materials use.
Let's dive into this new series of articles on sustainability, treatment processes and innovations in nickel production, starting with nickel ores.
Dr. Stanley Whittingham is a SUNY distinguished professor of chemistry and the 2019 Chemistry Nobel Laureate for pioneering research leading to the development of the lithium-ion batteries. The Nickel Institute’s battery specialist, Dr. Parvin Adeli caught up with him to talk about his long career in battery research and what’s next.
Nickel-based catalysts are key to supplying energy to power our transportation of goods and people, whether by land, sea, or air.
This is the second article in a series on the impact of temperature on electric vehicles. Given the delivery waiting time for electric vehicles, you may be expecting to receive your EV in summer or next winter. This series has been developed to help you understand the implications of temperature.
World Food Safety Day on 7 June 2023 draws attention to food standards. Foodborne diseases affect 1 in 10 people worldwide each year, and food standards help us to ensure what we eat is safe.
Mark Mistry and Marco Vallini argue that for the EU Critical Raw Materials Act to fulfil its promise to address the energy transition, industry needs planning security for both ‘critical’ and ‘strategic’ raw materials.
Reducing energy-related CO2 emissions is pivotal to limiting climate change, with the main drivers to bring about the required carbon reductions being renewable energy and energy efficiency. Concentrated solar power is one such renewable energy technology set to increase dramatically in the foreseeable future. It will need to provide energy at a competitive cost to outshine the competition.
Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.
The sudden failure of a building or bridge is mercifully a rare event, thanks largely to international or national standards: structures are designed in accordance with a design standard, using products conforming to a product standard and manufactured using techniques and to a quality level defined in a construction standard.
Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.
Awareness about robustness and durability of bridge design has grown since Morandi’s time. The new San Giorgio Bridge (its successor) in Genoa was designed by Renzo Piano and inaugurated in 2020.
The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.
Steven Verpaele, the Nickel Institute’s Industrial Hygienist explains how a new workplace exposure collection tool and database system will help prevent occupational diseases and contribute to creating a health and safety culture at the workplace.
The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.
The proposed Regulation will introduce a wide range of sustainability requirements and promote the recycling of key battery raw materials like nickel. EU legislative work is entering a crucial phase.
Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.
More than ten years on from the implementation of the EU’s REACH regulation, NiPERA’s Tara Lyons-Darden looks back and shares some of the learnings and the challenges of maintaining REACH dossiers from the perspective of the Nickel REACH Consortia.
Even small quantities of nickel in an application can make a big difference to successful deployment.
“There’s a mental hurdle to get over of how inherently gross this could be, but we know that this water is safe, and we stand by our process.”
Geothermal energy for electric power production has a low profile yet is significant in the current and potential energy mix for a number of countries. It has also been described as the most reliable of the renewable energy sources, above weather-dependent wind, solar and hydropower.
The many new and innovative applications of hydrogen as fuel show great promise for a greener future.
Steven Verpaele, the Nickel Institute’s Industrial Hygienist explains the different ways that the work he leads is helping to contributing to the culture of occupational safety and health that respects the right to a safe and healthy working environment at all levels.
Professor Stefano Passerini is the Director of the Helmholtz Institute Ulm. In this Battery Chat, he talks to Parri Adeli regarding their work on high-voltage LNMO cathodes and electrolyte additives, among other topics.
As electric vehicles (EVs) trend from being niche to mass scale and the lines between EVs and their combustion engine (ICE) counterparts get blurred in terms of usability, consumers, automakers, governments and fire departments continue to have some apprehensions.
Professor Jeff Dahn, at the Department of Physics and Atmospheric Science, Dalhousie University in Nova Scotia, Canada explains how single crystal technology is proving to be a promising solution to the challenge of overcoming range anxiety which is high on the agenda of electric vehicle manufacturers and battery developers.
Dr. Feng Lin is an assistant professor in the chemistry department of Virginia Tech. In this Battery Chat, he talks to Parri Adeli about his scientific journey and his research into cathodes and catalysts.
Prof. Arumugam Manthiram, a renowned professor at the University of Texas at Austin, has contributed substantially to the field of energy storage with his research having great impact on the scientific community. In this chat, Prof. Manthiram shares his research path briefly, his perspective on current research performed on high-nickel cathodes, and a glimpse of his future research directions.
New advances in the use of Artificial Intelligence have the potential to speed up the process of alloy development.
The last three months have been unprecedented. But amidst the chaos and despite the drop in global GDP, there has still been a considerable amount of activity in the electric vehicle (EV) and battery world.
Food safety starts with rigorous hygiene, and nickel-containing stainless steels are the superior, reliable standard at every link of the food chain.
The electric vehicle market is expected to be by far the largest and most dominant market for lithium-ion (Li-ion) batteries. Despite the strong desire to increase EV sales by all involved in the value chain, proliferation has been curbed due to the high cost to the consumer and the perceived disadvantages of owning an EV. Range anxiety, a lack of charging stations and fire safety worries, are among the top concerns.
Partially corrugated stainless steel service pipes have reduced water leakage rates drastically in Tokyo where they were introduced in the 1980s. Now other innovative water authorities faced with the urgent need to reduce water loss are also examining the nickel-containing stainless steel solution.