Heather Allain, Executive Director, Materials Technology Institute (MTI), tells us about her passion for materials and the importance of MTI’s work to provide awareness of safe, reliable and sustainable materials use.
Dr. Veronique Steukers sets out three principles which will allow companies to manage and measure ESG impacts and engage on a path to improvement.
As much of the world heads to the polls this year, Veronique Steukers explains why newly elected lawmakers should care about nickel and why they should consider three policy asks.
With global EV sales approaching 14 million cars in 2023 with a year-on-year growth rate of 35% it is clear that EVs are gaining acceptance rapidly.
Mark Mistry and Marco Vallini argue that for the EU Critical Raw Materials Act to fulfil its promise to address the energy transition, industry needs planning security for both ‘critical’ and ‘strategic’ raw materials.
Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.
Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.
The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.
The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.
In 2021, China recorded the strongest growth in the EV market with around 3.2 million EVs sold. This was an increase of 2 million EV units compared to 2020 which was more than the combined increase of all other regions taken together.
The proposed Regulation will introduce a wide range of sustainability requirements and promote the recycling of key battery raw materials like nickel. EU legislative work is entering a crucial phase.
Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.
Electrification of light-duty vehicles is trending in many parts of the world and is on track to become a consumer driven phenomenon but let’s not forget the heavy-duty vehicles such as trucks and buses.
Nickel-based alloys and nickel-containing stainless are playing key roles in an emerging source of renewable energy known as thermal solar plants or concentrated solar power (CSP). Their use has enabled the industry to overcome challenges in heat transfer and thermal storage technology.
The many new and innovative applications of hydrogen as fuel show great promise for a greener future.
As electric vehicles (EVs) trend from being niche to mass scale and the lines between EVs and their combustion engine (ICE) counterparts get blurred in terms of usability, consumers, automakers, governments and fire departments continue to have some apprehensions.
A new generation of designers, materials specifiers, architects and engineers is being introduced to the wealth of technical information curated by the Nickel Institute. An archive of technical guides and know-how for working with nickel-containing materials, including stainless steel, that has been built over thirty years is now being updated and made freely available.
When Courtney Love wrote this she was not thinking about rockets. It is, however, a perfect description of the history of rocketry. Until the Elon Musk revolution.
The last three months have been unprecedented. But amidst the chaos and despite the drop in global GDP, there has still been a considerable amount of activity in the electric vehicle (EV) and battery world.
Space is hard but nickel makes it possible. The United States of America, through the private company SpaceX, imminently expects to regain its independent way into space.
Most nickel production is destined for stainless steel. But a significant 8% is used in the production of alloy steels which are needed to deliver specific characteristics for specialised and often critical applications.