Heather Allain, Executive Director, Materials Technology Institute (MTI), tells us about her passion for materials and the importance of MTI’s work to provide awareness of safe, reliable and sustainable materials use.
Dr. Stanley Whittingham is a SUNY distinguished professor of chemistry and the 2019 Chemistry Nobel Laureate for pioneering research leading to the development of the lithium-ion batteries. The Nickel Institute’s battery specialist, Dr. Parvin Adeli caught up with him to talk about his long career in battery research and what’s next.
After several years of negotiation between EU institutions, the EU Carbon Border Adjustment Mechanism (CBAM) Regulation was adopted in 2023.
The new EU Battery regulation has implications for nickel producers both inside and outside Europe. If they are supplying material to the EU battery chain destined for the European market all producers need to comply with the new rules.
This is the second article in a series on the impact of temperature on electric vehicles. Given the delivery waiting time for electric vehicles, you may be expecting to receive your EV in summer or next winter. This series has been developed to help you understand the implications of temperature.
Because the first step in reducing emissions is to measure them, the Nickel Institute has produced guidance to help nickel metal producers calculate their GHG emissions.
Solar farms are blooming in fields across the globe and producing a new crop: solar energy. Photovoltaic (PV) systems made up of solar panels, are fast becoming the most recognisable of renewable energy technologies.
Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.
Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.
The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.
The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.
The proposed Regulation will introduce a wide range of sustainability requirements and promote the recycling of key battery raw materials like nickel. EU legislative work is entering a crucial phase.
Even small quantities of nickel in an application can make a big difference to successful deployment.
“There’s a mental hurdle to get over of how inherently gross this could be, but we know that this water is safe, and we stand by our process.”
The many new and innovative applications of hydrogen as fuel show great promise for a greener future.
Professor Stefano Passerini is the Director of the Helmholtz Institute Ulm. In this Battery Chat, he talks to Parri Adeli regarding their work on high-voltage LNMO cathodes and electrolyte additives, among other topics.
As electric vehicles (EVs) trend from being niche to mass scale and the lines between EVs and their combustion engine (ICE) counterparts get blurred in terms of usability, consumers, automakers, governments and fire departments continue to have some apprehensions.
Professor Jeff Dahn, at the Department of Physics and Atmospheric Science, Dalhousie University in Nova Scotia, Canada explains how single crystal technology is proving to be a promising solution to the challenge of overcoming range anxiety which is high on the agenda of electric vehicle manufacturers and battery developers.
Dr. Feng Lin is an assistant professor in the chemistry department of Virginia Tech. In this Battery Chat, he talks to Parri Adeli about his scientific journey and his research into cathodes and catalysts.
Prof. Arumugam Manthiram, a renowned professor at the University of Texas at Austin, has contributed substantially to the field of energy storage with his research having great impact on the scientific community. In this chat, Prof. Manthiram shares his research path briefly, his perspective on current research performed on high-nickel cathodes, and a glimpse of his future research directions.
New advances in the use of Artificial Intelligence have the potential to speed up the process of alloy development.
The short answer is: yes, nickel can be a sustainable material throughout the entire value chain, from mining, manufacturing, to use and end of life – if all actors throughout the value chain step up and take their responsibility. Now let's look at the longer answer...
The last three months have been unprecedented. But amidst the chaos and despite the drop in global GDP, there has still been a considerable amount of activity in the electric vehicle (EV) and battery world.
The electric vehicle market is expected to be by far the largest and most dominant market for lithium-ion (Li-ion) batteries. Despite the strong desire to increase EV sales by all involved in the value chain, proliferation has been curbed due to the high cost to the consumer and the perceived disadvantages of owning an EV. Range anxiety, a lack of charging stations and fire safety worries, are among the top concerns.