In Part 2 of this series we dig deeper into the specifics of laterites, one of the two main nickel ore types and look at smelting, the most common processing technique.
Heather Allain, Executive Director, Materials Technology Institute (MTI), tells us about her passion for materials and the importance of MTI’s work to provide awareness of safe, reliable and sustainable materials use.
Let's dive into this new series of articles on sustainability, treatment processes and innovations in nickel production, starting with nickel ores.
Dr. Stanley Whittingham is a SUNY distinguished professor of chemistry and the 2019 Chemistry Nobel Laureate for pioneering research leading to the development of the lithium-ion batteries. The Nickel Institute’s battery specialist, Dr. Parvin Adeli caught up with him to talk about his long career in battery research and what’s next.
Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.
The sudden failure of a building or bridge is mercifully a rare event, thanks largely to international or national standards: structures are designed in accordance with a design standard, using products conforming to a product standard and manufactured using techniques and to a quality level defined in a construction standard.
Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.
The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.
The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.
A team of researchers, led by Professor Jeff Dahn at Dalhousie University, have developed and demonstrated batteries that can last four million miles (almost six million km).
Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.
Even small quantities of nickel in an application can make a big difference to successful deployment.
Geothermal energy for electric power production has a low profile yet is significant in the current and potential energy mix for a number of countries. It has also been described as the most reliable of the renewable energy sources, above weather-dependent wind, solar and hydropower.
The many new and innovative applications of hydrogen as fuel show great promise for a greener future.
Professor Stefano Passerini is the Director of the Helmholtz Institute Ulm. In this Battery Chat, he talks to Parri Adeli regarding their work on high-voltage LNMO cathodes and electrolyte additives, among other topics.
As electric vehicles (EVs) trend from being niche to mass scale and the lines between EVs and their combustion engine (ICE) counterparts get blurred in terms of usability, consumers, automakers, governments and fire departments continue to have some apprehensions.
Dr. Ilias Belharouak is the head of electrification and energy storage at the Oak Ridge National Laboratory. In this Battery Chat, he talks to Parri Adeli about the various energy storage topics his group are investigating including a new class of cathodes that they developed recently and its scale-up path.
Professor Jeff Dahn, at the Department of Physics and Atmospheric Science, Dalhousie University in Nova Scotia, Canada explains how single crystal technology is proving to be a promising solution to the challenge of overcoming range anxiety which is high on the agenda of electric vehicle manufacturers and battery developers.
Dr. Feng Lin is an assistant professor in the chemistry department of Virginia Tech. In this Battery Chat, he talks to Parri Adeli about his scientific journey and his research into cathodes and catalysts.
Prof. Arumugam Manthiram, a renowned professor at the University of Texas at Austin, has contributed substantially to the field of energy storage with his research having great impact on the scientific community. In this chat, Prof. Manthiram shares his research path briefly, his perspective on current research performed on high-nickel cathodes, and a glimpse of his future research directions.
Ever-tightening sulphur oxide (SOx) emission regulations are increasing the use of marine scrubbers globally. Scrubbers operate in a highly corrosive environment and require the resilience of nickel-containing alloys to prevent failure.
Most nickel production is destined for stainless steel. But a significant 8% is used in the production of alloy steels which are needed to deliver specific characteristics for specialised and often critical applications.