Heather Allain, Executive Director, Materials Technology Institute (MTI), tells us about her passion for materials and the importance of MTI’s work to provide awareness of safe, reliable and sustainable materials use.
World Food Safety Day on 7 June 2023 draws attention to food standards. Foodborne diseases affect 1 in 10 people worldwide each year, and food standards help us to ensure what we eat is safe.
Reducing energy-related CO2 emissions is pivotal to limiting climate change, with the main drivers to bring about the required carbon reductions being renewable energy and energy efficiency. Concentrated solar power is one such renewable energy technology set to increase dramatically in the foreseeable future. It will need to provide energy at a competitive cost to outshine the competition.
Awareness about robustness and durability of bridge design has grown since Morandi’s time. The new San Giorgio Bridge (its successor) in Genoa was designed by Renzo Piano and inaugurated in 2020.
In 2021, China recorded the strongest growth in the EV market with around 3.2 million EVs sold. This was an increase of 2 million EV units compared to 2020 which was more than the combined increase of all other regions taken together.
Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.
Major economies across the globe are setting climate neutrality targets. But proper measurement and methodologies are needed to provide transparency and common benchmarks when assessing carbon footprint. At a recent event in China, there was general consensus on the importance of adopting a harmonized approach to carbon footprint calculation and disclosure.
Electrification of light-duty vehicles is trending in many parts of the world and is on track to become a consumer driven phenomenon but let’s not forget the heavy-duty vehicles such as trucks and buses.
While it may require an initial higher investment when compared with other materials, stainless steel’s unique properties deliver long-term performance and economic benefits including minimum downtime, reduced maintenance costs and reduced environmental impacts.
Nickel-based alloys and nickel-containing stainless are playing key roles in an emerging source of renewable energy known as thermal solar plants or concentrated solar power (CSP). Their use has enabled the industry to overcome challenges in heat transfer and thermal storage technology.
Geothermal energy for electric power production has a low profile yet is significant in the current and potential energy mix for a number of countries. It has also been described as the most reliable of the renewable energy sources, above weather-dependent wind, solar and hydropower.
As electric vehicles (EVs) trend from being niche to mass scale and the lines between EVs and their combustion engine (ICE) counterparts get blurred in terms of usability, consumers, automakers, governments and fire departments continue to have some apprehensions.
New advances in the use of Artificial Intelligence have the potential to speed up the process of alloy development.
Food safety starts with rigorous hygiene, and nickel-containing stainless steels are the superior, reliable standard at every link of the food chain.
Ever-tightening sulphur oxide (SOx) emission regulations are increasing the use of marine scrubbers globally. Scrubbers operate in a highly corrosive environment and require the resilience of nickel-containing alloys to prevent failure.
Most nickel production is destined for stainless steel. But a significant 8% is used in the production of alloy steels which are needed to deliver specific characteristics for specialised and often critical applications.
Partially corrugated stainless steel service pipes have reduced water leakage rates drastically in Tokyo where they were introduced in the 1980s. Now other innovative water authorities faced with the urgent need to reduce water loss are also examining the nickel-containing stainless steel solution.