In Part 2 of this series we dig deeper into the specifics of laterites, one of the two main nickel ore types and look at smelting, the most common processing technique.
Heather Allain, Executive Director, Materials Technology Institute (MTI), tells us about her passion for materials and the importance of MTI’s work to provide awareness of safe, reliable and sustainable materials use.
Let's dive into this new series of articles on sustainability, treatment processes and innovations in nickel production, starting with nickel ores.
The new EU Battery regulation has implications for nickel producers both inside and outside Europe. If they are supplying material to the EU battery chain destined for the European market all producers need to comply with the new rules.
World Food Safety Day on 7 June 2023 draws attention to food standards. Foodborne diseases affect 1 in 10 people worldwide each year, and food standards help us to ensure what we eat is safe.
Solar farms are blooming in fields across the globe and producing a new crop: solar energy. Photovoltaic (PV) systems made up of solar panels, are fast becoming the most recognisable of renewable energy technologies.
Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.
Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.
Awareness about robustness and durability of bridge design has grown since Morandi’s time. The new San Giorgio Bridge (its successor) in Genoa was designed by Renzo Piano and inaugurated in 2020.
The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.
The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.
Batteries, notably those used in electric vehicles, play an essential role in the plans of the European Commission to deliver the EU Green Deal. They are considered as a critical and strategic technology to achieve Europe´s ambitious climate change mitigation targets and to move towards green and sustainable mobility.
Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.
Major economies across the globe are setting climate neutrality targets. But proper measurement and methodologies are needed to provide transparency and common benchmarks when assessing carbon footprint. At a recent event in China, there was general consensus on the importance of adopting a harmonized approach to carbon footprint calculation and disclosure.
A new generation of designers, materials specifiers, architects and engineers is being introduced to the wealth of technical information curated by the Nickel Institute. An archive of technical guides and know-how for working with nickel-containing materials, including stainless steel, that has been built over thirty years is now being updated and made freely available.
The present-day principal driver in the Li-ion industry is the large batteries required for electric vehicles. Due to the size of these batteries and the relative growth of electric vehicles it is predicted that the total Li-ion energy capacity will exceed one tera watt-hour by 2030. This anticipation for a dramatically rapidly expanding industry has stakeholders all along the value chain very motivated to be ready.
Food safety starts with rigorous hygiene, and nickel-containing stainless steels are the superior, reliable standard at every link of the food chain.
European nickel producers need a consistent regulatory framework. There must be coherence between different EU policy objectives with rules based on principles of sound science, risk-based approaches, full life-cycle thinking and impact assessments.
Most nickel production is destined for stainless steel. But a significant 8% is used in the production of alloy steels which are needed to deliver specific characteristics for specialised and often critical applications.
Should we be worried about there being enough nickel to supply the transition to electric vehicles and cleaner energy sources? Given its wide range of uses in important existing and emerging technologies, this is a frequently asked question.