Chronickels

Nickel news, views, commentary and insights

SEPTEMBER 08 - 2023

Ferronickel and NPI importers to the EU: get ready for the EU Carbon Border Adjustment Mechanism and its data collection and submission requirements

After several years of negotiation between EU institutions, the EU Carbon Border Adjustment Mechanism (CBAM) Regulation was adopted in 2023.

STAINLESS STEEL NICKEL ALLOYS EU POLICY REGULATION
SEPTEMBER 06 - 2022

300 series austenitic alloys – Checking all the boxes

Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.

STAINLESS STEEL NICKEL ALLOYS TOOL STEEL NICKEL STEEL TECHNICAL HELP
JUNE 10 - 2022

300 series vs. ferritic stainless steel – Which one should I choose?

Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.

NICKEL ALLOYS STAINLESS STEEL NICKEL STEEL
MAY 17 - 2022

300 series vs. duplex stainless steel – Which one should I choose?

The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.

NICKEL ALLOYS STAINLESS STEEL NICKEL STEEL
APRIL 06 - 2022

300 vs 200 series stainless steels - Which alternative suits?

The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.

NICKEL ALLOYS NICKEL STEEL STAINLESS STEEL
JANUARY 27 - 2022

Mining electronics waste

Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.

SUSTAINABILITY BATTERIES RESOURCES AND RESERVES RECYCLING RESEARCH & DEVELOPMENT RAW MATERIALS
SEPTEMBER 23 - 2021

Wind and water - Nickel in clean energy

Even small quantities of nickel in an application can make a big difference to successful deployment.

NICKEL ALLOYS STAINLESS STEEL WATER SUSTAINABILITY SUSTAINABLE DEVELOPMENT GOALS BATTERIES RENEWABLE ENERGY
JANUARY 26 - 2021

A wealth of knowledge

A new generation of designers, materials specifiers, architects and engineers is being introduced to the wealth of technical information curated by the Nickel Institute. An archive of technical guides and know-how for working with nickel-containing materials, including stainless steel, that has been built over thirty years is now being updated and made freely available.

NICKEL ALLOYS NICKEL STEEL STAINLESS STEEL TECHNICAL HELP ARCHITECTURE, BUILDING AND CONSTRUCTION
FEBRUARY 29 - 2020

Why Europe’s battery value chain needs regulatory certainty – now

European nickel producers need a consistent regulatory framework. There must be coherence between different EU policy objectives with rules based on principles of sound science, risk-based approaches, full life-cycle thinking and impact assessments.

BATTERIES EU POLICY RAW MATERIALS SUSTAINABILITY
JANUARY 06 - 2020

Is there enough nickel? Reserves, resources and recycling

Should we be worried about there being enough nickel to supply the transition to electric vehicles and cleaner energy sources? Given its wide range of uses in important existing and emerging technologies, this is a frequently asked question.

SUSTAINABILITY RAW MATERIALS RESOURCES AND RESERVES SUPPLY CHAIN RECYCLING