Chronickels

Nickel news, views, commentary and insights

JANUARY 31 - 2024

Why should policy makers care about nickel?

As much of the world heads to the polls this year, Veronique Steukers explains why newly elected lawmakers should care about nickel and why they should consider three policy asks.

SUSTAINABILITY EU POLICY REGULATION
SEPTEMBER 06 - 2022

300 series austenitic alloys – Checking all the boxes

Materials selection for any piece of equipment or a process system is rarely a simple task, unless you are exactly replicating something successful. Often engineers will have a checklist to help them narrow down the choices, eliminating groups of materials that are not suitable for various reasons. Austenitic 300 series stainless steels containing 7-35% nickel will have most if not all of the boxes checked for being suitable where a stainless steel is desired.

STAINLESS STEEL NICKEL ALLOYS TOOL STEEL NICKEL STEEL TECHNICAL HELP
JUNE 10 - 2022

300 series vs. ferritic stainless steel – Which one should I choose?

Each family of stainless steels has its strengths and weaknesses. Ferritic stainless steels have useful properties – a lower rate of thermal expansion, higher thermal conductivity, strong ferromagnetism and very high resistance to chloride stress corrosion cracking (SCC). When looking at selecting any alloys, it is important to consider all the factors for successful usage.

NICKEL ALLOYS STAINLESS STEEL NICKEL STEEL
MAY 17 - 2022

300 series vs. duplex stainless steel – Which one should I choose?

The duplex alloys are “problem-solving alloys” for good reason, they have been successfully used in many places where carbon steels and standard austenitic alloys have failed. Just like with the austenitic family, there are many different duplex alloys to choose from, with corrosion resistance varying from moderate with the lean duplex alloys to very high with the superduplex alloys.

NICKEL ALLOYS STAINLESS STEEL NICKEL STEEL
APRIL 06 - 2022

300 vs 200 series stainless steels - Which alternative suits?

The selection of an alloy should be guided by careful examination of the needs of the application. Before making a switch, it’s important to fully investigate an alloy’s strengths, weaknesses and applicability to your structure.

NICKEL ALLOYS NICKEL STEEL STAINLESS STEEL
JANUARY 27 - 2022

Mining electronics waste

Think of the largest cruise ship. Then imagine how much it weighs – just over 100,000 tonnes, in fact. Now think about 500 of those ships, and what they weigh. That is the staggering amount of new electronic waste that we generate every year.

SUSTAINABILITY BATTERIES RESOURCES AND RESERVES RECYCLING RESEARCH & DEVELOPMENT RAW MATERIALS
SEPTEMBER 23 - 2021

Wind and water - Nickel in clean energy

Even small quantities of nickel in an application can make a big difference to successful deployment.

NICKEL ALLOYS STAINLESS STEEL WATER SUSTAINABILITY SUSTAINABLE DEVELOPMENT GOALS BATTERIES RENEWABLE ENERGY